CULTURED COWBOY PRESENTS


Big Horn Western Saddles


Big Horn Flex Tree Pleasure Saddles  

If you want the most comfort and utility for your money, this is a great flex tree pleasure saddle for you. Big Horn Saddles offers an exceptional flex tree that allows flex from front to rear and from side to side. These movements are especially important with the rigors of trail riding.  Place your weight more over the front end, or more to the horse's center as you feel that you need, for a particular landscape. Deep conditions, winding downhills, position of the run, etc.,  ...a flex tree does make a difference. And the 16 or 17 inch seat saddle models allow plenty of room for the larger rider, or the rider that wants more movement in his/her saddle seat.

The flexible tree allows easier movement for the horse while making those sharp bends going around curves, as well as up and down hills. Place less pressures on the kidneys, shoulders, and on your saddle block! Made on Quarter Horse Bars to allow as much padding as needed to mate up with your horse. 

What are curved skirts about?  Look at the picture and see that the dee holding the girth strap hangs freely and in front of the fenders. See how the skirt is cut toward the center line? This slight upward lift in the skirt of your western saddle allows your leg to be in closer contact with your horse. In other words, less effort to ride easier.


No. 1640 -16 inch seat. 4" Cantle 
Ralide Flexible Tree
No. 1642 -17 inch seat. 4" Cantle 
Ralide Flexible Tree

Curved Skirts,  Flex Tree, QH Bars

The dropped ring rigging and cut away, or curved skirts, allow you to sit with your legs close to your ride. This gives you greater and quicker control of your ride.

 

  • Tree: Ralide flexible saddle tree minimizes pressure points and allows for better performance. Quarter Horse Bars.
  • Gullet: Medium Plus 6 3/4" wide.  6" high.
  • Horn: 2 3/4" x 2 1/2".
  • Cantle: 4" Cheyenne Roll.
  • Seat: 16"  padded suede leather seat.
  • Rigging: 7/8 position, Front Stainless Steel dropped Dee. Rear slot.
  • Skirts: 27" x 14" fleece lining, Butterfly Cut, contoured close contact.
  • Fenders: 18" x 8" leathers with stainless steel buckles. Nylon reinforced stirrup leathers.
  • Finish: Medium Oil, Basket/Barbed Wire border tool. Dees under rear conchos for tie straps. 
  • Weight: 32 lbs
 #1640-16"   Medium Oil, flexible tree
 #1642-17"   Medium Oil, flexible tree
 Compare At: $1450.00
 CC Price: $875.99

 

The Flex Tree allows easier movement for the horse while making those sharp turns. Take offs place less pressures on the kidneys. 


No. 1672 -16 inch seat. 5" Cantle 
Ralide Flexible Tree
No. 1673 -17 inch seat. 5" Cantle 
Ralide Flexible Tree

Curved Skirts,  Flex Tree, Full QH Bars

The dropped ring rigging and cut away, or curved skirts, allow you to sit with your legs close to your ride. This gives you greater and quicker control of your ride.

  • Tree: Ralide flexible saddle tree minimizes pressure points and allows for better performance. Full Quarter Horse Bars.
  • Gullet: Wide 7" wide.  6 1/4" high.
  • Horn: 2 3/4" x 2 1/2".
  • Cantle: 5" Cheyenne Roll.
  • Seat: 16"  padded suede leather seat.
  • Rigging: Double C Front Stainless Steel dropped Dee. Allows 3 way girth positioning. Rear slot.
  • Skirts: 27" x 14" fleece lining, Butterfly Cut, contoured close contact.
  • Fenders: 18" x 8" leathers with stainless steel buckles. Nylon reinforced stirrup leathers.
  • Finish: # 2 Brown, S Pattern border tool. Dees under rear conchos for tie straps. 
  • Weight: 32 lbs
#1672-16"   #2 Brown, flexible tree
 #1673-17"   #2 Brown, flexible tree
Compare At: $1450.00
CC Price: $875.99


Yes, we have matching bridles, reins, breast collars, cruppers, pads, blankets, etc. The world is at your footsteps! Just let us know what all you need when you call or email us and we'll be most happy to get a package put together for you.

BigHorn makes one of the finest neoprene slip resistant, non chafing, girths in straight or roper models. Nylon and Stainless Steel hardware are removable for easier cleaning. Sizes: 28, 30, 32, 34, 36. (Black or Brown).  No.9994 Straight, or "cutter" girth...$41.99   or No.9963 Roper or "wide center" girth...$59.99. Roper type is really shaped for elbow relief. It also has one side elasticized for better trail riding and arena fit. Easy to tighten roller rings for attaching to your saddle. This is one of my fav girths. 


Another favorite is the BigHorn felt lined, (nose & crown) halter. What this means to you is that of all the halters we have use for 40 years, these seem to be best for leaving on the horse during longer periods of time. The halter uses rated materials so that it should hold together for most pulls, but will break, or snap straighten with excessive effort that would have hurt your horse anyway. The felt allows this halter to be more comfy in most weather conditions.  Snaps are easily replaced. restitching with a standard leather type or heavy duty sewing machine , or by hand awl can be done. OR, the halter can be returned to us or to the maker, clean, for repairs. 1 year warrantee coverage, at our stables, ours average lasting over 10 years. Hardware is brass type with no bad edges. 7624 is 3/4 inch nylon, (not polypropylene), with adjustable crown & nose with throat snap (which can  be twisted either hook in or out). Available in sizes: XL Horse, reg Horse, Arab, yearling, weanling. (suckling & pony available too)  All popular colors available.  Only $18.99 or  3 for $16.99 each.     7139 is the same model in 1 inch nylon.  $19.99 or 3 for $18.49 each.

Matching leads have availability to interchange brass snap, halter chain, or bull snap as you like. Matching colors  1 inch heavy duty brass snap lead    Only $11.99 each   or 3 for $10.49 each.  (brass Chain leads add $1.00 each.)

Back to BigHorn Leather Index


"How to Place your Orders with us or,    Buy it Now "


www.culturedcowboy.com | Call or Email Us to Order! 864-223-3700 or 1-866-492-6926 Toll Free cowboy@culturedcowboy.com