CULTURED COWBOY PRESENTS




   

Circle G Wade Ranch Saddles
by
Circle G Brand Saddles

Circle G Brand Saddles are the quality and pride of hand made saddles that you can pass on to your grandkids. And since we never know quite what those kids may be doing, how about a ranch roper saddle that will let them do anything, just like it has for you. Engineered to take the daily grind, even in the most trying of weather conditions on the ranch, still, ranch ropers are among the most comfortable Western saddles made.

Tooling is planned and carved for each position on your saddle, rather than looking like an afterthought. Instead of using a die cut piece of leather with large leather conchos to cover the gaps, each piece of leather is hand fitted and properly molded for a tasteful and useful marriage between parts. Heavy oiling is available on each saddle.

Garoutte Products will make cowboy saddles that are better than average. Better in quality, better in fit and better in performance. If you are going to invest in a Wade tree saddle, for the tradition, or for the work load, it might as well be a good one. 

Whether or not you have the experience of a professional, anybody can sit in one of these Wade style roper saddles and tell it was made for a lifestyle. The tree and the saddle make your life more comfortable by placing emphasis on your seat and leg position. These cowboy saddles allow good close positioning with your horse. This series is built on a tough Cliff Wade bullhide covered wooden tree, made so you can take care of business. A strong post horn is used for roping, dragging or pulling. The ground seat and rise is proper to aid you in your riding, rather than restricting you, because you may leave this morning and come back next week! There are several stirrup options depending on your preferences for your type of ranch work. 

Circle G Wade saddles are designed for the strength and endurance which a cowhand or wrangler will put it through. Don't plan on having to trade this one in after a couple seasons! Your using saddle is built with selected woods, placed in positions according to their flexing and their rigid properties. Then bullhide covered to hold in moisture and add years of life. The tree maker gives a 5 year warrantee, but this is the type of tree that lasted over 20 years in your grandfather's saddles. Using the best leather on top of all that foundation will keep your seat in the saddle till it's time to "Give it up to Jesus".

The standard tree in this saddle is Full Quarter Horse bars with a 4 1/2 inch height cantle. With the specially formed seat, you can ride all day in confidence.  And, you can choose between a standing straight, or Cheyenne cantle roll.

Since leg position is important in the work of a cowboy, we are going to ask you a few questions about your leg dimensions, sort of like fitting for chaps, so that length of leg as well as diameter of thigh are properly positioned. With seat sizes from 14 to 16 in half inch increments, fit can be exacting. 

Rigging is shown as a dropped plate. Reinforced slot in the rear. Heavy duty rigging for all kinds of ranch work. The 1 piece hardseat can be rough or smooth side out. Want a padded bicycle seat added on top? We can do that too. 

High quality choices of heavy duty synthetic fleece, and wool are offered. 


No. GAR- 420122 Wade Roper Saddle.

All Circle G Saddles are hand made in the USA with the finest quality leather available. All are beautifully hand tooled with your choice of patterns.

Options:  Stirrup leathers over or under fenders. 4" Latigo lined flank set, Wool or fleece linings, Breast collar dees, Close contact, Choice of stirrup lengths, Seat color. Bicycle padded seat. Saddle Strings. Brass Conchos. Choice of 3/4, full or border tooling patterns:  Heavy Oiling.

 

No. GAR- 420122 Wade Ranch Roper Diamond Border Carved. 

  • Tree: Full Quarterhorse bars - 5 Year Warranty. Cliff Wade bullhide covered wooden tree
  • Seat: 14" - 17" (half sizes included) 1 Piece Hard Seat seat.
  • Swell: A Fork. Hand tooled.
  • Gullet: 7 inch width standard.
  • Horn: 4"x4" Mule wrapped. Rawhide Bound. 
  • Cantle:  4 1/2" Tooled leather. Straight or Cheyenne roll. Leather or Rawhide binding. 
  • Rigging: 3/4 or 7/8 Dropped Plate Front. Reinforced rear slot.
  • Stirrup Leathers: 3" with leather covered buckles
  • Stirrups:  Rawhide covered 3" laced roper stirrups, or 1" Iron Oxbows, or 2" Bell.
  • Finish:  Natural Oil or Chestnut
  • Weight:  Approximately 40 Pounds
  • Price Also Includes These Extras:  Brass hardware as shown, Diamond Border hand tooling as shown, Tooled Cheyenne Cantle binding, hand fitted ground seat. Hardseat. R/O or Smooth Fender & Jockey cut to your length, Leather latigos. Full Latigo Lined roper flank set. Real sheep's wool skirt lining. Saddle Strings.
No. GAR- 420122 Wade Roper Saddle 
Seat Sizes

Compare At:

Our CC Price

14", 14 1/2", 15",151/2", 16"

$3838.50

$2263.99

 17", 18"

Special Request

$

Look at the detail in both the hand carvings of the leathers and in the engraving of the silver. Each saddle is made by an artist with many saddles of experience under their belt. Their pride rides on the saddle made just for you. 

When you begin with the best quality leathers, and professional craftsmen, you can finish with a look that can compete in your arena. 


Also Available as:
  GAR- 420121 3/4 Floral tooling.
  GAR- 420122 Diamond Border.
  GAR- 420120 Basket stamp half breed.
    

Oh yes, there is Matching Tack!
Order your matching Breast Collar tooled with your saddle so the same artist matches them together. 

GAR- 420350 Heavy Duty Roping Breast Collar.
Single tug straps.
( double tugs available)
Tell us to match the saddle.
Choose color.
GAR-420350 RBCollar 
Compare At:$122.00
  CCPrice:$84.99 

Did you know that your supporting tack is as important as your saddle? Having a breast collar that is sturdy enough for the job, yet will move with your horse can make a difference in safety or falling off.  Be sure your girth is properly fitting and always do a pre-flight check on all parts of reins, headstalls, bits, ...everything, before your ride.

(Tooling detail of breast collar at left.) Remember, You choose your breast collar tooling pattern and color. (Basket, Oak, Basket & Oak, Basket / Barb Wire, to name a few)  Cultured Cowboy can match every saddle. More details on the Breast Collar page. 


Our Pricing:  

Our CC Prices are based on the saddle as shown and described.  Don't be shy about asking for options you need. 
For You, we will deliver more saddle value for the buck than anyone; because, 1) we spend more time asking you, your trainers, instructors and judges, the questions needed, to get everything right for you.  2) we actually ride. 3) we study several disciplines and more than one breed, allowing us to cross over great ideas. 4) we have the experience of fitting hundreds of riders and their horses. 5) we respectfully ask the tree makers and the saddle makers to work with us as a team. Making you the winning rider that you deserve to be always takes a willing team.  These are a few reasons that we understand more about riding, and fitting saddles than most! 

Really, with all the many options available, these saddles are hard to price without a conversation anyway.  There are options of colors, seats, sizes, and fitting. 
Thanks, & God Bless,   Chuck

And don't forget about a matching breast collar headstall and reins with your saddle! Cultured Cowboy carries a full complement of tack and accessories for you and your horse.

 Please e-mail or call us for a friendly quote on your “Dream Saddle”. 


back to Garroutte Saddles index  

Fitting Your Horse to the Saddle  |  Fitting the Rider | Saddle Types  |  Saddle Forms & Proper SaddlePads

Cultured Cowboy Saddle Index


"How to Place your Orders with us or,    Buy it Now "

Contact Us by Phone or Email! 1-864-223-3700 or 1-866-492-6926 toll free
www.culturedcowboy.com
  |  cowboy@culturedcowboy.com